LUDICROUS-LUMENS Saber wraith + (3x lens) with standard switch

£152.99 (ex. VAT: £127.49)

LUDICROUS-LUMENS Saber wraith + (3x lens) with standard switch
(3x fast focus lens system)

  • Class 3B laser product
  • 210MM
  • 400G
  • 500MW
  • 850NM
  • Requires 1x button topped/protected 18650 battery to be inserted positive end first (not included unless selected)

Two year warranty period

Out of stock

LUDICROUS-LUMENS Saber wraith + (3x lens) with Rotary dimmer  switch
(3x fast focus lens system)

  • Class 3B laser product
  • 210MM
  • 400G
  • 500MW
  • 850NM
  • Requires 1x button topped/protected 18650 battery to be inserted positive end first (not included unless selected)

LUDICROUS-LUMENS Saber wraith + (3x lens) with standard switch

year warranty period

Night Saber wraith + (3x lens) with standard switch

& safe operation guidelines

Although the laser diode used in the wraith are safer than the older edge emitters we are still classing them as 3B & advise the associated level of caution when in use.Class 3B lasers have the potential to cause eye injury so responsible use & every care must be taken.LUDICROUS-LUMENS Saber wraith + (3x lens) with standard switch

  • Night Saber wraith + (3x lens) with standard switch
  • remove the battery when not in use or changing lens
  • Always remove battery before removing from rifle
  • Never look into the lens
  • Do not expose any part of your body to the beam
  • Treat this laser as you would a firearm
  • Keep away from minors & store securely
  • Do not point at reflective surface
  • Swapping head*please ensure battery is removed & do not overtighten head/lens.

When you first receive your wraith best performance can be achieved by fine tuning in the field with your night vision, to do this simply screw the rubber lens fully in & loosen the grub screw on the collar to adjust the beam to its tightest point before you get visible artefacts in the image.then simply nip up the grub screw to prevent movement of the collar.

LUDICROUS-LUMENS Saber wraith + (3x lens) with standard switch

must be taken when fitting the larger 3x head as the threads are a tighter specification/fit.

Do not over tighten the lenses as this can/will cause undue strain on the lenses internal mechanism when removing & could inadvertently cause damage. Use a narrow strap/band wrench if it has been over tightened close to the aluminium adaptor to remove rather than on the main part of the head.Additional aluminium lens adaptors are available so your lens can be changed along with the aluminium adaptor for easier lens swaps (£15,99+ post please enquire via email for invoice a wraith laser must have been purchased to qualify)

 

Translate
0
    0
    Your Cart
    Your cart is emptyReturn to Shop