Irbuilds Sirius XTL IR laser torch

Check link below

The new sirius XTL with illuminated switch info

https://fb.watch/v/dntdAA3y8/

Irbuilds Sirius XTL IR laser torch

Sirius XTL IR laser torch is the ultimate addition for use with night vision, focusable from flood to spot, this torch allows scope magnification in excess of 20x optical to be used,

These are fitted with the diffuser lense and have 3 power settings

These units are 3  mode, settings  if needed  to reduce intensity

Irbuilds Sirius XTL IR laser torch

Also have a flood spot setting on the lense

The unit itself emits a very small IR signature so is much more covert than LED offerings as well as being more powerful.

The pill, head and torch body are all machined and assembled by hand to provide great build quality.

Great when using the atn 4k ,sightmark wraith

NOW WITH THE OPTIONAL ILLUMINATED RATS TAIL SWITCH WHICH IS SILENT WHEN PRESSED

WE THINK THIS IS THE BEST TORCH MONEY CAN BUY

These units are fitted with a Class 3B laser and care should be taken when in use.

Irbuilds Sirius XTL IR laser torch

ALLOW USE BY RESPONSIBLE PERSONS

This is not a toy. Children should not be permitted to use Class 3B lasers.

Any teenager using a Class 3B laser should be continuously supervised by a responsible adult.
Do not stare at any visible or invisible IR emitter source when in use

The torch is supplied as a bare unit only and is powered by a 18650 battery cell that is not supplied and needs to be purchased separately 

Check link below for batteries

If you are looking to buy an ir illuminator. ask the seller to show you the soldering on the front of the pill and on the rear.

Lets see how many will do that.

Here is the quality  the Irbuilds Sirius XTL IR laser torch  made from the bare components by Ian the maker  in house.

I bet no other seller shows you the torch internals

Check out the pics in the Gallery

SIRIUS XTL TORCH OPERATION   INSTRUCTIONS

Switch on the torch you are on 100% power, to switch between modes, half press the rubber on/off button, you will then get to the 50% mode, same again, half press the on/off button and you will get the 15% mode. Half press again and you'r back to the 100% mode. Torch will always start on 100%, if given 3-4 seconds from being switched off. 

Ignore the writing on the dust cap, it is a dust cap and can be removed in daylight. 

A combination of twisting the lens head  in and out to get spot and flood and the modes, you will be able to shoot Rats close in and foxes at long distances.

The package deal mounts. The black washer is what you use to screw the mount to the Weaver riser rail, so you don’t over tighten.

Takes one 18650 battery. Positive end goes in first to the battery body.

Any other questions please ask.

TORCH NEEDS TO BE FITTED TO TORCH MOUNT  IN A CERTAIN WAY

CHECK PIC BELOW

SIRIUS XTL LASER IR TORCH